Latest News & Optical Communication Industry Insights | A Fiber

Home>NEWS
Fiber Optic Fast Connector Termination
Fiber Optic Fast Connector Termination
When to Use a Fast Connector in FTTR Work (and When to Fuse Instead)FTTR deployments push a fiber drop from a central ONT or distribution point to an optical terminal in each room. That means many low...
08,Oct 2026 MORE
Invisible Fiber Optic Cable Installation
Invisible Fiber Optic Cable Installation
Whole-home fiber does not end at the optical network terminal. The last few meters — from the ONT to the TV, the gaming console, or the study desk — are where most FTTR jobs either look great or fall ...
08,Oct 2026 MORE
FTTR Topology Design: Star vs Bus
FTTR Topology Design: Star vs Bus
Every FTTR design starts with the same fork in the road: do you run one fiber from a central splitter to every room, or do you run a single fiber and chain the rooms along it? The choice — star versus...
08,Oct 2026 MORE
FTTR vs Mesh Wi-Fi: Complete Comparison
FTTR vs Mesh Wi-Fi: Complete Comparison
This comparison is written by TTI Fiber, which manufactures FTTR optical equipment — fiber drop cables, PLC splitters, and room ONTs. That means we have a horse in this race, so here is the honest fra...
08,Oct 2026 MORE
What Is FTTR? Fiber to the Room Explained
What Is FTTR? Fiber to the Room Explained
What Is FTTR?FTTR (Fiber to the Room) is an in-building optical network architecture that extends fiber optic cable beyond the building entry point directly into individual rooms, where dedicated opti...
08,Oct 2026 MORE
IP67 vs IP68 Industrial Fiber Connectors
IP67 vs IP68 Industrial Fiber Connectors
Put an IP67 connector and an IP68 connector side by side on the bench and the datasheets look almost interchangeable. Both are dust-tight. Both survived an immersion test. The difference is not one ru...
08,Oct 2026 MORE
Oil and Gas Fiber Optic Cable Guide
Oil and Gas Fiber Optic Cable Guide
Ask five cable suppliers for an oil and gas fiber optic cable and you may get five different quotes — loose-tube here, tight-buffer there, steel tape armor, no armor, LSZH jacket or PE. None of them i...
08,Oct 2026 MORE
How to Choose Mining Fiber Optic Cable
How to Choose Mining Fiber Optic Cable
A mine network is a brutal place for cable. Crushing loads from roof falls, standing water, abrasive dust, and high-voltage power runs that would make a copper link useless within months. Pick the wro...
08,Oct 2026 MORE
Substation Fiber Optic Cabling Guide
Substation Fiber Optic Cabling Guide
Why Substation Fiber Optic Cabling Runs on GlassA substation is one of the least friendly places on the grid for a communications link. Switching transients, fault currents, corona discharge and radio...
15,Sep 2026 MORE
Industrial Fiber Optic Cable Guide: Complete Selection
Industrial Fiber Optic Cable Guide: Complete Selection
What Makes a Fiber Optic Cable "Industrial"?A maintenance supervisor once described the failure this way: the cable looked fine from the outside. Inside, the jacket had cracked, moisture had...
15,Sep 2026 MORE
ADSS Tracking Resistance: A Field Guide
ADSS Tracking Resistance: A Field Guide
ADSS Tracking Resistance: Space Potential, AT Jackets, and the Standards That Actually ApplyA jacket compound that passed a 4.5 kV inclined-plane tracking test can still burn through in a few years. N...
15,Sep 2026 MORE
The Difference Between OPGW and Traditional Wires
The Difference Between OPGW and Traditional Wires
Optical Ground Wire (OPGW) is reshaping how utilities build and monitor overhead power transmission lines. By merging the lightning-protection role of a traditional static/shield/earth wire with an em...
15,Sep 2026 MORE
+86-13549323913